Playing An Mp3 Disc; Repeat And Shuffle; Repeat Play; Random Play - Philips FWM589/19 User Manual

Disc Operations

Playing an MP3 disc

1
1
Load an MP3 disc.
➜ The disc reading time may exceed 10
seconds due to the large number of songs
compiled into one disc.
➜ "AXX TYYY" is displayed. XX is the current
album number and YYY is the current title
number.
2
Press à / á (ALBUM 4 / 3) to select a
desired album.
3
Press í / ë (TITLE - / +) to select a
desired title.
4
Press É Å to start playback.
● During playback, press DISPLAY to show the
album and title name.
Supported MP3 disc formats:
– ISO9660, Joliet, UDF 1.5
– Maximum title number : 999 (depending on
filename length)
– Maximum album number : 99
– Supported sampling frequencies : 32 kHz,
44.1 kHz, 48 kHz
– Supported Bit-rates : 32~256 (kbps), variable
bitrates
– ID3 tags : V1.1, V2.2, V2.3, V2.4
20

Repeat and shuffle

You can select and change the various play
modes before or during playback.
TITLE
A02 T008

Repeat play

3
1
Press REPEAT on the remote repeatedly to
4
select :
2
A
ALB
A02 T001
B
C
A –
B –
C –
D –
E –
2
To resume normal playback, press REPEAT
until "OFF" is displayed.

Random play

● Press SHUFFLE on the remote to turn
on/off the shuffle mode.
➜ If activated,
mode (if any) will be cancelled.
➜ The random play will start from the current
disc tray. Only after all the tracks in the active
disc tray have been shuffled, then it will change
to the next available disc tray.
➜ If programme mode is active, only the
programmed tracks will be played in random
order.
Note:
– Pressing the OPEN•CLOSE button will cancel all
repeat and shuffle modes.
D
E
to repeat playback of the current track.
to repeat playback of the current disc.
to repeat playback of all available discs
(not available for this model).
to repeat playback of the current
programmed track (only if the
programme mode is active)
to repeat playback of all the programmed
tracks (only if the programme mode is
active)
is shown and the repeat
SHUF