Table of Contents
Advertisement
Disc Operations
IMPORTANT!
– This system is designed for regular
discs. Therefore, do not use any
accessories such as disc stabiliser rings or
disc treatment sheets, etc., as offered on
the market, because they may jam the
disc mechanism.
– Do not move the system during
playback. Doing so may damage the
system.
– Do not push on the disc tray or put
any object other than disc on the disc
tray. Doing so may cause the system to
malfunction.
– DVD discs and players are designed
with regional restrictions. Before playing
a disc, make sure the disc matches the
regional code of your player.
– According to the format requirement
of DVD or VCD, some operations may be
different or restricted.
Playing discs
1
Press STANDBY ON on the system to switch
on the system, and then press DISC to select
disc mode.
2
Power on the TV system and set to the correct
Video In channel (See Setting the TV set).
➜
You should see the blue Philips DVD
background screen on the TV set.
3
Press OPEN/CLOSE to open the disc tray and
load a disc .
➜
Make sure the disc label is facing up. For
double-sided discs, load the side you want to
play facing up.
4
Press OPEN•CLOSE to close the disc tray.
➜
"CLOSE" will appear for 2 seconds then
"LOADING" will be displayed on the VFD.
22
➜
If the disc is locked by parental control, you
must enter your four-digital password (See
Restricting playback by setting parental level).
5
Press 38 to start playback.
For MP3/ DiVX/WMA
●
Load an MP3/ DIVX/ WMA disc in the disc tray.
➜Press DISC MENU to select menu on/off.
➜In stop mode to select desired title, please
refer to"MP3/ DIVX/ WMA/Picture Disc
Operations".
Notes:
– Load discs with the label side facing up.
– To ensure good system performance, wait until
disc reading is completed before proceeding.
Using
the disc menu
For disc with Table Of Contents, a menu may
appear on the TV screen once you load the disc.
To select a playback feature or item
●
Press 1 / ¡ / 5 / 4 or numeric keys
(0-9) on the remote control, then press 38 or
OK to start playback.
To access or remove the menu
●
Press DISC MENU on the remote control.
Advertisement
Table of Contents
