Basic Operations; Switching On/Off; Switching To Active Mode; Switching To Eco Power Standby Mode - Philips FWM589/19 User Manual

Switching on/off

Switching to active mode

● Press CD, TUNER, AUX or
USB PC LINK.

Switching to Eco Power standby mode

● Press B.
➜ ECO POWER button lights up.
➜ The display screen will go blank.

Switching to standby mode (view clock)

● Press and hold B.
➜ The clock is displayed.
➜ While in standby mode, pressing
CLOCK•TIMER button will switch the system to
Eco Power standby mode.
Note:
– Before switching the system to Eco Power
standby or standby mode, make sure the
demonstration mode has been deactivated.

Demonstration mode

If the demonstration mode is active, whenever
you switch the system to Eco Power standby or
standby mode, it will begin showing the various
features offered by the system.
To activate the demonstration
● In Eco Power standby/standby mode,
press and hold Ç on the main unit until "DEMO
ON" is displayed.
To deactivate the demonstration
● Press and hold Ç on the main unit until
"DEMO OFF" is displayed.

Basic Operations

Setting the clock

The clock can be set in either 12-hour or
24-hour mode ("11:59
example).
1
Press and hold CLK/TIMER (or
CLOCK•TIMER on main unit) until "SELECT
CLOCK OR TIMER" is displayed.
2
Press ë to change the display to "CLOCK" and
press CLK/TIMER (CLOCK•TIMER) again
to confirm.
3
Press PROGRAM (PROG) repeatedly to
change between 12-hour and 24-hour clock
mode.
4
Press à or á repeatedly to set the hour.
5
Press í or ë repeatedly to set the minute.
6
Press CLK/TIMER (CLOCK•TIMER) to
store the setting.
➜ The clock will start working.
To view the clock time in any active
mode
● Press CLK/TIMER (CLOCK•TIMER) once.
➜ The clock is displayed for a few seconds.
Notes:
– The clock setting will be erased when the
system is disconnected from the power supply.
– The system will exit clock setting mode if no
button is pressed within 90 seconds.
" or "23:59" for
PM
00 00
5
(00: / 12: AM)
2
4
00 12
( :00 / :00AM)
3
(00:00 î 12:00AM)
1, 2, 6
17