Setting Up Menu 3 Of 3 In Multiplex Mode - Panasonic AJ-FX216 Operating Instructions Manual

3. TITLE DISPLAY
This parameter lets you decide whether or not to
have the title displayed.
1. Move the cursor to the TITLE DISPLAY parameter.
* MENU 2 OF 3 *
TITLE SETUP *
TITLE POSITION *
TITLE DISPLAY
STILL/ALARM DISP
2. Select ON or OFF.
ON: Title display
OFF: No title display
The factory setting is ON.
4. STILL/ALARM DISP
This parameter lets you decide whether or not to
have the word "STILL" displayed when a picture is
paused by pressing button 16 (STILL ON), or the
word "ALARM" when the unit receives the alarm
signal.
1. Move the cursor to the STILL/ALARM DISP parame-
ter.
* MENU 2 OF 3 *
TITLE SETUP *
TITLE POSITION *
TITLE DISPLAY
STILL/ALARM DISP
2. Select ON or OFF.
ON: "STILL" and "ALARM" are displayed.
OFF: "STILL" and "ALARM" are not displayed.
The factory setting is ON.
ON
ON
ON
ON
-11-
C. Setting up MENU 3 OF 3 in
MULTIPLEX mode
The content of MENU 3 OF 3 in MULTIPLEX mode
is as shown below.
* MENU 3 OF 3 *
BORDER
AUTO SKIP
SEQUENCE SETUP *
START SCREEN
SYSTEM MODE
1. BORDER
This parameter lets you select the colour of the bor-
ders that divide the screen.
1. Move the cursor to the BORDER parameter.
* MENU 3 OF 3 *
BORDER
AUTO SKIP
SEQUENCE SETUP *
START SCREEN
SYSTEM MODE
2. Select the colour of the borders.
OFF: No borders
BLACK: Black borders
GRAY: Grey (Gray) borders
WHITE: White borders
The factory setting is WHITE.
2. AUTO SKIP
This parameter lets you select automatic skipping of
channels to which no camera is connected.
1. Move the cursor to the AUTO SKIP parameter.
* MENU 3 OF 3 *
BORDER
AUTO SKIP
SEQUENCE SETUP *
START SCREEN
SYSTEM MODE
2. Select ON or OFF.
ON: Channels to which no camera is connected are
skipped.
OFF: No channels are skipped.
The factory setting is OFF.
WHITE
OFF
1-SEQ
MULTIPLEX
WHITE
OFF
1-SEQ
MULTIPLEX
WHITE
OFF
1-SEQ
MULTIPLEX