Setup Menu - Panasonic WJ-FS316 Operating Instructions Manual

SETUP MENU

In the SETUP MENU you can set preferences for ALARM,
MONITOR, REC OUT, SEQUENCE and SYSTEM to meet
your requirements.
Displaying the SETUP MENU
1. Confirm that the camera and peripherals are connected
correctly and securely.
2. Turn on the power switches of all system components.
3. Press the MENU/ESC button for 2 seconds or more.
The SETUP MENU appears on the monitor as shown
below.
MENU
ESC
The items of the WJ-FS309/FS409 SETUP MENU are the
same as in the WJ-FS316/FS416 SETUP MENU.
9
WJ-FS316 SETUP
ALARM SETUP
MONITOR OUTPUT SETUP
REC OUTPUT SETUP
SEQUENCE SETUP
SYSTEM SETUP
• The following buttons are used in the SETUP MENU:
C: Moves the cursor downward.
D: Moves the cursor upward.
A: Moves the cursor to the left.
B: Moves the cursor to the right.
– : Selects the mode or parameter.
+ : Selects the mode or parameter.
SET: Executes the selections and displays a submenu
for an item with the (
<WJ-FS309/FS409>
1 2 3 4
<WJ-FS316/FS416>
9 10 11 12
• Press the MENU/ESC button to execute the currently
highlighted setting and return to the previous menu in
the SETUP MENU.
• To finalize the setting and return to normal viewing,
press the MENU/ESC button for 2 seconds while the
SETUP MENU is displayed.
Note: If alarm is activated during the setup operation,
the SETUP MENU disappears and the display
returns to the normal picture. Any settings previous-
ly made take effect, even if the MENU/ESC button
was not pressed yet.
) mark.
5 6 7
SET
13 14 15
SET