Table of Contents
Advertisement
OPERATING PROCEDURES
For details on operation and adjustment, refer to the
operating instructions for the camera.
(1) Switch on the individual devices.
(2) Adjust lens flange-back.
• Flange-back adjustment is necessary if you are
using the camera for the first time, or if the lens has
been changed.
• A long charge time makes adjustment difficult. It is
recommended, therefore, that you adjust it after set-
ting the charge time to OFF in a bright place (See
page 13.).
(3) Set the charge time according to the intensity of
illumination of the object you are shooting.
(See page 13.)
(4) Adjust the lens iris and focus.
(5) Adjust the white balance.
• It is necessary if you are using the camera for the
first time, or if you haven't used it for a long time.
• It is also necessary if a change has been made in
the lighting conditions or light intensity.
• Once adjusted, the white balance does not need to
be adjusted again unless the conditions of use are
changed.
(6) Adjust the black balance.
• It is necessary if you are using the camera for the
first time, or if you haven't used it for a long time.
• It is also necessary if the ambient temperature has
considerably changed or at the turn of a season.
• Once adjusted, the black balance does not need to
be adjusted again unless the conditions of use are
changed.
• After inserting the card AW-PB303, it takes a longer
time for black balance adjustment because of the
black balance correction that takes place during
storage operation.
(7) Shoot the object.
(After using the camera, switch off the individual
devices.)
• To change the camera settings according to the use
and conditions, refer to the operating instructions for
the camera.
• To change the charge time set, see page 13.
-11-
Advertisement
Table of Contents
