Operating Precautions; Accessory; Features - Panasonic AG-CVF10G Operating Instructions Manual

Operating precautions

Compatible camera recorders
This viewfinder supports the AG-HPX600 and AJ-HPX series of camera recorders.
Please contact the dealers for other compatible models.
Depending on the model, viewfinder output may be set to black and white image as an initial setting.
For how to switch the output to a color image, refer to the operating instructions for each camera recorder.
Concerning a monitor with a liquid crystal display
• When the same images or characters are left displayed for prolonged periods of time on an LCD monitor,
image burn-in may occur on the screen. However, the screen will revert to normal once the power has
been turned off and kept turned off for several hours.
• The ratio of effective pixels used for the LCD monitor is controlled to the high accuracy of more than
99.99%, which means that less than 0.01% of the pixels may be missing or permanently lighted. This is
not indicative of any malfunctioning and does not have any adverse effect on the recorded images.
• Condensation may form on the LCD monitor in locations where the temperature fluctuates significantly.
If condensation does form, wipe it off using a soft dry cloth.
• If the viewfinder unit has become cold, the images displayed on the LCD monitor will be slightly darker
than usual immediately after the power is turned on. The normal brightness will be restored once the
temperature inside rises.

Accessory

The following accessory is attached to the viewfinder.
• Eye cup

Features

• Focusing is now easier thanks to the use of a high-definition color LCD monitor.
• The viewfinder barrel unit can be flipped up, and operations can then be performed while directly viewing
the LCD monitor with its large screen.
• This viewfinder can replace an existing HD viewfinder.
• The viewfinder can be used with the AG-HPX600 and AJ-HPX series.
E-5