Table of Contents
Advertisement
1/4
: Storage for 1/4 second. Sensitivity is about
twice as high as that when 1/8 second is
set.
1/2
: Storage for 1/2 second. Sensitivity is about
twice as high as that when 1/4 second is
set.
1
: Storage for 1 second. Sensitivity is about
twice as high as that when 1/2 second is
set.
2
: Storage for 2 second. Sensitivity is about
twice as high as that when 1 second is set.
Note 1: Field storage and frame storage
details, refer to the operating instructions for the
camera.)
There are two ways of CCD read: field storage
read and frame storage read. In case of stor-
age operation using the high-sensitivity card,
frame read increases the vertical resolution over
field read, and produces pictures of higher defi-
nition, but lowers the sensitivity by half. If frame
read is set, therefore, the minimum intensity of
illumination will be about one half the specified
value.
Note 2: Electronic shutter operation (For details,
refer to the operating instructions for the cam-
era.)
• The electronic shutter does not work during
storage operation (other than when Auto or OFF
is set).
Under halogen lights or fluorescent lights, or in out-
door mode
• [AUTO ND (ELC)] selection is inhibited.
(Unselectable)
• If [Fine] is chosen in [V Resolution] selection, the
(For
electronic shutter only will be off.
In user mode
• [Shutter mode] selection is inhibited.
(Unselectable)
• If [Frame 2] is chosen in [Field/Frame] selection,
the electronic shutter only will be off.
[Frame 1] or [Frame 2} is selected, display will
be in [Frame]. Operation is the same as when
[Frame 1] is selected.
-14-
When
Advertisement
Table of Contents
