Language Selection; New Security Code; Select Keypad Tones - Motorola ST8000 Quick Reference

j New Security Code j j j
The security code is used to control access to security and other
options within the menus.
This option is used to change the security code, which is set by
Motorola to 000000.
Once selected, you will be asked to enter the current security
code before you can proceed.
You will then be asked to enter a new six-digit code to replace
the old security code.
In order to safeguard your phone, you should change your
A
security code from the factory setting as soon as possible.
j Extended Menus j
j j
i Press and hold M. Extended Menus will be temporarily
activated until you exit the Options Menu.
This option is used to switch Extended Menus on or off.
If the extended menu option is switched off, you will not be able
to access any of the extended features.
The option has two settings,
54
Using the Options Menu
On or Off .
j Language Selection j j j
This option is used to change the language for display messages.
The option has multiple settings of English, French, and Spanish.
The automatic selection will display English.
When you select a language, all further display prompts and help
messages will be in the selected language.
Battery Saving Mode
This option can help you to conserve battery power. Also known
as DTX (Discontinuous Transmission), this feature will cause your
phone to operate at reduced power when you are not talking.
The option has two settings,
j Select Keypad Tones j
j j
This option allows you to change or disable the tones that you
hear when you press keys on your phone.
The option has three settings:
or
No Tones .
On or Off .
Normal Tones , Single Tone ,