Table of Contents
Advertisement
Send as an SMS Message
Impress your friends with your musical ability by sending your composed music
tone via an SMS message to another Motorola phone. If you receive a music
tone, you can play, save, or delete it.
Quick Access Setup
You can customise your Quick Access menu so you can quickly get to
the features you use the most. Refer to "Quick Access Menu" on
page 85 for usage and set up.
Phone Lock
You can lock your Personal Communicator to prevent others from using it.
Automatic Lock
When set to On, your Personal Communicator is locked automatically when it is
turned on. To use it, enter the unlock code.
Lock Now
Immediately locks your Personal Communicator from further use. To use it again,
enter the unlock code.
69
Note: Be careful, your Personal Communicator locks up if the code is entered
incorrectly three times in a row.
Caution: If the PIN2 unblocking operation is performed incorrectly 10
times in a row, your PIN2 code becomes permanently blocked, please
see your service provider.
Unblocking Your V100 Personal Communicator
If you are blocked from accessing your V100 Personal Communicator, use the
following key sequence and the 8-digit PIN unblocking code that was provided by
your Cellular Service Provider to unblock it:
† † ‡ ... †
Unblock Code ( New PIN Code ( New PIN Code (
The new PIN code must contain four to eight digits.
Note: If this operation is performed incorrectly 10 times in a row, your SIM card will
become permanently blocked.
New Security Code
Enter the current security code, then a new six-digit code. The security code is set
by the manufacturer to 000000. If this code does not work, see your service
provider.
71
Change Unlock Code
Use to change your unlock code. Follow the prompts given and enter a new
code. The code set by the manufacturer is 1234. If this code does not work,
check with your service provider.
Adjust Contrast
Lets you lighten or darken your display.
Require SIM Card PIN
When set to On, you need to enter your SIM card PIN each time it is inserted or your
Personal Communicator is turned on.
Note: This is not available if the SIM card does not support PIN code disabling.
How do I change my SIM card PIN? No problem, your Personal Communicator gives
you all the instructions.
Note: Be careful, if you enter your PIN incorrectly three times in a row, your
Personal Communicator locks up. See "Entering Your Unlock Code" on page 22 if
this happens.
Change SIM PIN2 Code
You can change your SIM PIN2 code just like your standard SIM code.
Note: This is a network and subscription dependent feature and may not be
available in all areas.
69
70
Extended Menus
Turn extended menus on or off. When Off, you are not able to access any of the
extended features.
Show Time and Date
When selected, time and date is displayed until you press a button.
Set Time and Date
Setting the time and date is easy. Just follow the instructions given by your Personal
Communicator. But remember, use the international date format (day/month/year).
Set Time Format
You can change to either 12-hour or 24-hour format.
Language Selection
All prompts and help messages will be displayed in the language you select.
Battery Saving Mode
Set this to On to help your battery last longer. All status indicators and the backlight
for incoming Cell Broadcast messages are turned off.
Select Keypad Tones
You can set this so you hear tones when you press the buttons on your Personal
Communicator, or you can also turn off the tones.
71
72
Advertisement
Table of Contents
