Outgoing Messages; Cell Broadcast - Motorola ST8000 Quick Reference

Outgoing Messages

This option is used to view and manage outgoing messages.
These messages will be stored on your SIM card. When you select
this option, the total number of messages will be displayed
followed by the first message in the list.
You cannot send an outgoing message until the Message
A
Service Center number has been set. See 'Message Settings'
on page 50.
Press O when viewing any message to enter the
, ,
Message Send Message Edit Message
Message submenu. See 'How to Read SMS Messages' on page
47 for more information on navigating through the messages.
Go to Next Message
This option will display the next outgoing message.
Send Message
If you select this option you will be prompted for a phone
number, enter the number and then press O to send the
message.
Edit Message
This option allows you to use the Message Editor to edit the
selected message and then to either send the modified message
or store it in your Outgoing Messages list. See 'How to Create
and Edit SMS Messages' on page 47 for more information on
using the Message Editor.
Delete Message
This option will delete the currently viewed message.
Message Editor
i
The Message Editor is used to create a new message or edit the
currently selected message. Once selected, choose to either
Message
See 'How to Create and Edit SMS Messages' on page 47 for more
information on using the Message Editor.

Cell Broadcast

Go to Next
This option is used to set the Cell Broadcast settings. The option
and
Delete
has two settings,
If you change the setting to
channel.
Please contact your Service Provider for a list and description of
available channels.
While a broadcast message is scrolling across the display, you can
stop and start it by pressing *. Press # to restart the
message from the beginning. If you want to remove the message
from the display, press C followed by O.
If you need to use * and # for their normal functions
A
while you are receiving a Cell Broadcast message, first you
must remove the message.
Press E7 to access Message Editor
or in your Outgoing Messages list.
Store Message
On or Off .
On , you will be asked to choose a
Using the Options Menu
Send
49