Getting Started - Motorola ST8000 Quick Reference

Getting Started

In order to get started using your new StarTAC phone right away,
follow these simple steps:
Charge the Battery
! Before you use your phone, please see the 'Your Battery'
section for important information on battery charging.
1 Remove the battery from its holder and clip it into your phone.
2 Snap the included AC plug into the top of the power adapter.
3 Connect the power adapter to the phone and plug it in.
Powering On
1 Insert the SIM card into the slot in the base of your phone.
2 Fully extend the antenna.
3 Open your phone and press S to switch on.
4 If prompted, enter your PIN code and press O.
Once a PCS network is located by your phone, it connects and
the network name appears on the display.
2 Introduction
Making a Call
1 Enter the number you want to call.
2 Press O. Your call is placed!
IMPORTANT! Ending a Call
When you have finished your conversation, press O or close
the phone to end your call.
Exploring
Did you know that you can leave your phone on when charging
the battery? Now, while your phone's battery is charging for the
first time, may be a good time to begin exploring your phone's
menu and features, or make or receive a call if you wish.