Making And Receiving Phone Calls - Motorola ST8000 Quick Reference

Switching the Phone On and Off
To switch the phone on or off, press S. If VibraCall™ alert is
selected, the phone will vibrate when it is switched on.
If the phone displays
Insert Card
inserted. Once inserted, the phone will check that the SIM card
is valid.
One of the following messages will be displayed:
• - a request to enter the SIM card PIN code (if
Enter PIN
required).
• Enter Phone Unlock Code
unlock code (if required).
• Searching... followed by a network name - as the phone
finds a suitable network to connect to.
Entering Your SIM Card PIN Code
To enter the PIN code, enter PIN Code O.
As you type in each digit of the PIN code, a
displayed.
If you make a mistake, press C to remove the last digit.
Holding C down will remove the entire entry.
When the PIN code is complete, press O.

Making and Receiving Phone Calls

, there is no SIM card
- a request to enter the phone
* character will be
If the PIN code is incorrect, the message
displayed, followed by
Enter PIN
! If an incorrect PIN number is entered three times consecutively,
your phone will automatically lock up and the
message will be displayed. See 'Unblocking Your Phone' on
page 53 for details on unblocking.
To change the PIN code, see 'Change SIM PIN Code' on page 53
in Using the Options Menu.
j Entering Your Phone Unlock Code
If your phone displays the message
, you must enter your unlocking code by entering Unlock
Code
Code O.
Your phone unlock code is a four-digit number, initially set at
manufacture to 1234. To change the code, see 'Change Unlock
Code' on page 52 in Using the Options Menu.
If you forget your unlock code, press M repeatedly until the
display reads Change Unlock Code
enter a new unlock code, and press O. Your phone's security
code is set at manufacture to 000000. See Phone Setup Menu on
page 51 for more information.
Making and Receiving Phone Calls
Wrong PIN will be
.
Blocked
Enter Phone Unlock
. Press O Security Code,
19