Language Selection; Change Greeting; Battery Saving Mode; Extended Menus - Motorola 7500 User Manual

O New Security Code
The security code is used to control access to security and
other options within the menus.
This option is used to change the security code, which is set at
manufacture to 000000.
Once selected, you will be asked to enter the current security
code before you can proceed.
You will then be asked to enter a new, six digit code to replace
the old security code.
In order to safeguard your phone, you should change your
A
security code from the factory setting as soon as possible.
O Extended Menus
L
Press and hold M. Extended Menus will be temporarily
activated until you exit the Options menu.
This option is used to switch the extended menus on or off.
If the extended menu option is switched off, you will not be
able to access any of the extended features.
The option has two settings,
O Language Selection
This option is used to change the language for display
messages.
The option has multiple settings.
When you select a language, all further display prompts and
help messages will be in the selected language.
English 44
Using The Options Menu
Call Related Phone
M
Features Setup
or Off.
On
Network Call Accessory
Selection Meters Setup
O Change Greeting
This option is used to change the message displayed when you
switch on your phone.
Once selected, you will be able to enter a new greeting of up
to 24 characters. The characters are entered in the same way
as names, see 'How to Enter a Name' in the Using the Phone
Book Menu section for more information.
The new greeting will be displayed when your phone is next
switched on.

Battery Saving Mode

This option can help you to conserve battery power. Also
know as DTX (Discontinuous Transmission), this feature will
cause your phone to operate at reduced power when you are
not talking.
The option has two settings,
O Select Keypad Tones
This option allows you to change or disable tones you hear
when you press a key.
The option has three settings,
or
Single Tone No Tones.
O selects an option, C will reject or cancel.
On or Off.
Normal Tones,