Table of Contents
Advertisement
Handling Batteries
Your new batteries are fitted with protective covers. These covers
must be removed before the battery can be used. Save the covers
to carry and store batteries that are not in use. Covers prevent
electrically conductive objects from making contact with the
battery terminals, thereby reducing the risk of injury or damage
from a battery short circuit.
Removing the Main Battery Cover
1
Press and hold the release latch.
2
Press the battery upwards, out of its cover.
Fitting the Main Battery Cover
1
Lower the side of the battery opposite the release latch into
the cover.
2
Lower the side of the battery with the release latch into the
cover until the latch clicks into place.
Removing the Auxiliary Battery Cover
1
Hold the battery securely with one hand.
2
With the thumb of your other hand, press the base of the
cover upwards. Continue this action until the cover slides free
from the pins on the bottom of the battery.
3
Swing the cover away, clear of the battery.
Fitting the Auxiliary Battery Cover
1
Slide the narrow end of the cover into the small grooved hook
on the top of the battery.
2
Push the cover firmly upwards until the base of the cover slides
past the battery pins; then release.
12
About Your Phone, Battery, and SIM Card
Fitting a Battery to Your Phone
Fitting a Main Battery
Position the battery as illustrated in the following diagram, and
snap-lock it into place.
Fitting an Auxiliary Battery
1
Place the hook on the battery into the slot on the back of the
phone.
2
Pull the battery toward the bottom of the phone until the two
pins click into place.
Advertisement
Table of Contents
