Outgoing Messages; Message Editor; Cell Broadcast - Motorola Select 3000 Quick Refence Manual

Outgoing Messages

This option is used to view and manage your Outgoing Message
list. These messages will be stored on your SIM card. When you
select this option, the total number of messages will be
displayed, followed by the first message in the list.
You cannot send an outgoing message until the Message
A
Service Center number has been set. See 'Message Settings'.
Press O, when viewing any message, to enter the 'Go to Next
Message', 'Send Message', 'Edit Message' and 'Delete Message'
sub-menu. See 'How to Read SMS Messages' for more
information on navigating through the messages.
Go to Next Message
This option will display the next outgoing message.
Send Message
If you select this option, you will be prompted for a phone
number. Enter the number and then press O to send the
message.
Edit Message
This option allows you to use the Message Editor to edit the
selected message and then to send the modified message and/or
store it in your Outgoing Messages list. See 'How to Create and Edit
SMS Messages' for more information on using the Message Editor.
Delete Message
This option will delete the currently viewed message.
Keep regularly used short messages handy by storing them in
A
your Outgoing Message list. Simply recall a stored message and
modify if necessary, then send it to keep people up to date.

Message Editor

i E7 to access Message Editor.
The Message Editor is used to create a new message or edit the
currently selected message. Once selected, choose to either
or
Send Message Store Message
list. See 'How to Create and Edit SMS Messages' for more
information on using the Message Editor.

Cell Broadcast

This option is used to set the Cell Broadcast settings.
The option has two settings,
If you change the setting to
channel.
Please contact your Service Provider for a list and description of
available channels.
While a broadcast message is scrolling across the display, you
can stop and start it by pressing *. Press # to restart the
message from the beginning. If you want to remove the
message from the display, press C followed by O.
If you need to use the * and # keys for their normal
A
functions while you are receiving a Cell Broadcast message,
you must first remove the message.
Using the Options Menu
in your Outgoing Messages
On or Off .
On , you will be asked to choose a
43