Message Editor; Outgoing Messages; Cell Broadcast - Motorola MOT00 Manual

Messages Menu
Return Call
This option can be used to call the person who sent you the
message, if their number has been included by the network, or a
number that has been included in quotes "" in the message.
Edit Message
This option allows you to use the Message Editor to edit the
selected message and then to either send the modified message
and/or store it in your Outgoing Messages list. See 'How to
Create and Edit SMS Messages' for more information on using
the Message Editor.

Outgoing Messages

This option is used to view and manage any outgoing messages.
These messages will be stored on your SIM card. When you select
this option, the total number of messages will be displayed
followed by the first message in the list.
You cannot send an outgoing message until the Message
A
Service Centre number has been set. See 'Message Settings'.
Press the O key, when viewing any message, to enter the 'Go to
Next Message', 'Send Message', 'Edit Message' and 'Delete
Message' sub-menu. See 'How to Read SMS Messages' for more
information on navigating through the messages.
Go to Next Message
This option will display the next outgoing message.
Send Message
If you select this option you will be prompted for a phone
number, enter the number and then press O to send the
message.
English
34
Using the Features
Edit Message
This option allows you to use the Message Editor to edit the
selected message and then to either send the modified message
or store it in your Outgoing Messages list. See 'How to Create
and Edit SMS Messages' for more information on using the

Message Editor.

Delete Message
This option will delete the currently viewed message.
Message Editor
The Message Editor is used to edit the currently selected message
and then to either send the modified message or store it in your
Outgoing Messages list. See 'How to Create and Edit SMS
Messages' for more information on using the Message Editor.

Cell Broadcast

This option is used to set the cell broadcast settings. The option
has two settings or Off.
On
If you change the setting to On, you will be asked to enter the
channel you wish to receive information from.
Please contact your Cellular Service Provider for a list of available
channels and the information they provide.
While a broadcast message is scrolling across the display you can
stop and start it by pressing *. Press # to restart the message
from the beginning. If you want to remove the message from the
display, press C followed by O.
If you need to use the * and # keys for their normal
A
functions while you are receiving a cell broadcast message,
you must first remove the message.