Making And Receiving Phone Calls - Motorola V3682 Quick Reference

Switching the Phone On and Off
Press to turn the phone on; press and hold
phone off. If VibraCall™ is selected, the phone will vibrate when
it is switched on.
If you switch the phone on and there is no SIM card inserted, you
will be asked to insert one. Once inserted, the phone will check
that the SIM card is valid.
A number of messages will then be displayed:
• - a request to enter the SIM card PIN code (if
required).
•
phone unlock code (if required).
• followed by a network name - as the phone
searches and then finds a suitable network to connect to.
Entering Your SIM Card PIN Code
To enter the PIN code, enter A
As you type in each digit of the PIN code a
displayed.
If you make a mistake, press and release the
the last digit. Holding the
entry.
When the PIN code is complete press the
If the PIN code entered is incorrect, the warning message
will be displayed, followed by

Making and Receiving Phone Calls

to turn the
- a request to enter the
.
character will be
key to remove
key down will remove the entire
key.
.
If the PIN number is entered incorrectly three times in a
row, your phone will automatically lock up and the
message will be displayed. See 'Unblocking
Your Phone' for details on unblocking your phone.
The PIN code can be changed; see 'Change SIM PIN Code' in the
Phone Setup Menu section for more details.
Entering Your Unlock Code
If your phone displays the message
you must enter your unlocking code by entering
B
.
The unlock code is a four digit number which is set by Motorola
to 1234. The code can be changed; see 'Change Unlock Code' in
the Phone Setup Menu section for more details.
If you forget your unlock code, press the
display the 'Change Unlock Code' option. Enter
D, enter a new unlock code, and press
Making and Receiving Phone Calls
key. This will
.
21