Making And Receiving Phone Calls - Motorola SELECT 2000 Manual

Switching the Phone On and Off
Simply press S to switch the phone on or off. When the phone
turns on, you will see a greeting message.
If you switch the phone on and there is no SIM card inserted, you
will be asked to insert one. Once inserted, the phone will check
that the SIM card is valid.
One of the following messages will then be displayed:
• - Enter the SIM card PIN code.
Enter PIN
•
Enter Phone Unlock Code
• The phone is searching for a suitable network.
Searching...
The name of the network found will then be displayed.
Entering Your SIM Card PIN Code
To enter the PIN code, press Pin Code O.
As you type in each digit of the PIN code a
displayed instead of the digit.
If you make a mistake, you can press and release C to remove
the last digit, or press and hold C to remove the entire entry.
Press O when you finish entering the PIN Code.

Making and Receiving Phone Calls

- Enter the phone unlock code.
* character will be
If the PIN Code entered is incorrect, you will see the warning
message Wrong PIN , followed by
! If an incorrect PIN number is entered three times in a row, your
phone will automatically lock-up and the
will be displayed. See 'Unblocking Your Phone' for details on
unblocking your phone.
You can easily change the PIN Code. See 'Change SIM PIN Code'
in Phone Setup Menu for more information.
jEntering Your Phone Unlock Code
If your phone is locked, you will see
Enter your unlock code by pressing
Your phone unlock code is a four-digit number which is set at
manufacture to 1234. The code can be changed. See 'Change
Unlock Code' in Phone Setup Menu for more details.
If you forget your phone unlock code, press M repeatedly until
the display reads
Change Unlock Code
Code, enter a new unlock code, and press O.
Making and Receiving Phone Calls
Enter PIN .
message
Blocked
Enter Phone Unlock Code .
O.
Unlock Code
. Press O Security
17