Dialing With Voice Dial - Motorola Timeport 270c Reference Manual

Sending and Receiving Calls
Press
SELECT +
3 ( )
Insert a Character From the Keypad
While dialing (with digits visible in the display):
Do This
1 Press and hold
for one second
*
2 release when the
character you want is
visible in the display

Dialing with Voice Dial

You can call a phonebook entry by speaking its voice name into the phone:
Do This
Press and release the voice key on the right side
of your phone and say the entry's name (in two
seconds).
You must store a voice name for the phonebook entry before you can use the voice dial feature. See
"Recording a Voice Name For a Phonebook Entry" on page 30.
To
select the option
To
*
begin cycling through the
insert the character at the current location in the dialing sequence
Voice key
p w n
, , and characters in sequential order
To
indicate the phonebook entry you want to dial
Your phone takes you to the phonebook entry, plays
back the voice name stored with the entry, waits
two seconds, then automatically dials the call.
Check to make sure this is the correct entry. To
cancel the call, press any key except for the voice
N
key or .
19