Dubbing From Tape To Tape - Kenwood XD-V555 Instruction Manual

Xd series
Hide thumbs Also See for XD-V555:
Table of Contents

Advertisement

4
7 STOP
1
3
5
7 STOP
3
2
4
2
Recording from the built-in radio
1
Tune in to the desired station. (see pages 19 -
21)
2
Load a cassette into the TAPE B cassette com-
partment.
3
Press the REC PAUSE button
"REC. " and "¶ 2 3" will flash.
4
Press the 2 button to record on side A or 3 (3/
SELECT) button to record on side B.
"REC. " will disappear and "¶ 2 or ¶ 3" will
light up on the display.
Note :
• If a whistling noise is heard whilst recording from
an AM station, move the AM loop antenna to a
position where noise is no longer heard from
the unit.
To interrupt recording :
1 Press the REC PAUSE button.
• "REC. " and "¶ 2 or ¶ 3" will flash.
2 Press the 2 or 3 (3/SELECT) button.
"¶ 2 or ¶ 3" will light up on the display.
To stop recording :
Press the 7 STOP (7/RETURN) button.

Dubbing from tape to tape

1
Press the
ON/STANDBY button to turn the
power on.
2
Load a prerecorded cassette into the TAPE A cas-
sette compartment. Insert a blank tape into the
TAPE B cassette compartment.
It is recommended that the recording tape be
the same length as the master tape.
3
Press the TAPE (A/B) button until "TAPE A" ap-
pears in the display.
4
Press the REC PAUSE button.
"REC. " and "¶ 3" will flash.
5
Press the 3 (3/SELECT) button.
"REC. " will disappear and "¶ 3" will light up on
the display.
To stop dubbing :
Press the 7 STOP (7/RETURN) button.
TAPE A and TAPE B will simultaneously stop.
41
EN

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xd-v757Xd-v858Xd-v252Xd series

Table of Contents