Direct Search System - Kenwood XD-V555 Instruction Manual

To remove the CDs :
Whilst in the stop mode, press the 0 OPEN/CLOSE
button.
• The disc tray will open. Remove the two discs.
Then, press the DISC SKIP button to rotate the
disc tray and remove the remaining disc.
•
If the disc cannot be removed after the disc tray
opens, close the disc tray and re-open it again.
After use :
Press the ON/STANDBY button to enter the
standby mode.
Note :
•
Whilst in the "VCD ON" mode, no sound can be
produced if you playback audio CDs.
To switch to "VCD AUTO" mode, press the VCD
AUTO button during stop mode.
4
2
3

Direct search system

1
1
2
3
•
A. For example, to choose 13
Press the "+10" button and "3" button.
B. For example, to choose 30
Press the "+10" button three times and "0" button
once.
4
Notes :
4
• The selected track will be played automatically
• During random playback, direct search system
•
Cautions :
• Do not carry the unit with discs left in the disc
trays. The disc may get displaced inside the
unit and damaged or cause damage to the
unit. This may also cause malfunctions.
• Do not place two CDs in one disc position.
• Do not push the disc tray whilst it is moving.
• Do not attempt to turn the disc tray by hand.
This may cause malfunctions.
• If the power fails whilst the tray is open, wait
until the power is restored.
• If the disc tray is stopped forcibly, "ER-CD10"
will appear in the display and the unit will not
function.
If this occurs, press the
button to enter the standby mode and then
turn the power on again.
• If TV or radio interference occurs during CD
operation, move the unit away from the TV or
radio.
• If a disc is damaged, dirty, or loaded upside
down, the disc will be skipped and the next
disc will automatically play.
Press the DISC SKIP button to activate the "TOC
READ" process for every disc in the disc tray.
Press the disc number button (DISC 1 - DISC 3)
button to select the desired disc.
Use the numeric buttons to select the desired
tracks.
The numeric buttons can be used to select up
to 9 track numbers for play. When selecting 10
or more track numbers, use the "+10" button.
Press the 3 (3/SELECT) button to start the play-
back.
when you press the numeric buttons during play-
back. (It is not necessary to press the 3 (3/
SELECT) button.)
is not possible.
DISC SKIP and DISC 1 - DISC 3 buttons cannot
function during "TOC READ" and disc tray rota-
tion.
ON/STANDBY
15 EN