Kenwood XD-V555 Instruction Manual page 16

P.CALL
4 1 ¡ ¢
7/RETURN
3
3/SELECT
16 EN
3/SELECT
RANDOM
P.CALL
4 1
¡ ¢
P.CALL
4 1 ¡ ¢
Random playback
(Remote control operation)
The tracks on the disc(s) can be played in random
order automatically.
1
Load a disc(s) and close the disc tray.
2
Press the RANDOM button to begin random play-
back.
•
"RDM" will light up on the display.
Notes :
• If you press the P . CALL ¡ ¢ button during
random playback, you can move to another track.
On the other hand, the P . CALL 4 1 button
does not allow you to move to the previous track.
The beginning of the track being played will be
located.
• When using random playback, be sure to press
the 7 STOP (7/RETURN) button after you are
through listening.
Otherwise, the disc(s) will play continuously.
• In random playback the unit will select and play-
back tracks automatically. (You cannot select the
order of the tracks.)
To cancel random play :
Press the 3 (3/SELECT) button.
Tracks Skipping
Tracks skipping will automatically locate the begin-
ning of any track.
To listen again to the track being
played :
Press the P . CALL 4 1 button for less than 0.5
second during playback.
To move to the beginning of the next
track :
Press the P . CALL ¡ ¢ button for less than 0.5
second during playback.
• To skip a number of tracks at one time, press
the P . CALL 4 1 or ¡ ¢ button repeat-
edly until the desired track number is shown.
• To start playback from a desired track, press the
P . CALL 4 1 or ¡ ¢ button whilst in the
stop mode to select the track number, and then
press the 3 (3/SELECT) button.
Note :
•
Tracks skipping function can only perform on a
single disc.
P . CALL 4 1 or ¡ ¢ button cannot func-
•
tion during pause mode.