How Do I Use Powertouch Iii - Kenwood Sovereign VR-5900 User Manual

How Do I Use PowerTouch III?

As you use PowerTouch III, be aware of the following:
• When PowerTouch III's operating range gets shorter or PowerTouch
III displays a low battery alarm, replace all 4 batteries. (see "Installing
the Batteries" on page 34 of the Connections and Setup Guide.)
• Do not install the receiver where direct sunlight or high-frequency
fluorescent lighting can shine directly into the infrared remote sen-
sor. This can limit PowerTouch III's operating range.
How Do I Use PowerTouch III?
Use your new PowerTouch III to control your new receiver and most de-
vices attached to it. PowerTouch III appears and functions a little differ-
ently from traditional remotes. Because it can control so many different
devices, it displays a separate set of controls for each device on an LCD
screen.
Only devices you have identified and connected to the receiver appear as
buttons on the touch screen. If you are "missing" a device's icon on the
HOME1 or HOME2 screen, make sure you have identified the device to
the PowerTouch III. For more information on identifying devices to the
PowerTouch III, see "Chapter Two: Setting Up PowerTouch III" in the
Connections and Setup Guide.
6