Radio Reception; Receiving Radio Broadcasting - Kenwood R-K1 Instruction Manual

Radio Reception

Receiving radio broadcasting

1 Select the [TUNER] input
2 Select the FM or AM band
3 Select the tuning mode
4 Select a radio station
frequency
To To
decrease increase
frequency
To decrease To increase
frequency frequency
PHONO MD TAPE
AUX D-IN 1 D-IN 2 DIMMER
TIMER
SLEEP
TIME/PTY
CLEAR DISPLAY
OPEN/
P.MODE RANDOM REPEAT CLOSE
MODE MUTE
AUTO/MONO DIRECT
TUNER CD D.AUDIO
BASS TREBLE FOLDER
PREV. NEXT
BALANCE
: Keys and controls used in the operation.
Each press switches the selection.
1 [FM]
2 [AM]
F M - -
Receiving band display
Each press switches the selection.
1 [AUTO] indicator ON: Auto tuning/Stereo reception
2 [AUTO] indicator OFF: Manual tuning/Monaural reception
ON during auto tuning/stereo reception
F M - -
÷ Normally, use the Auto tuning (stereo reception).
÷ When the radio wave receiving condition is poor and noisy, set
to MONO (manual tuning/monaural reception). The FM broad-
casting is played in monaural audio but the audio quality will
be improved.
F M - -
In auto tuning mode: Press either key once to receive the next
searched station automatically.
In manual tuning mode: Press and hold either key to vary the
frequency continuously. The frequency scanning stops at the
moment the key is released.
8 8 . 0 0 M H z
8 8 . 0 0 M H z
ON when a station is turned
8 7 . 5 0 M H z
Frequency display
EN
23