Presetting Stations Manually (Manual Preset); Receiving A Preset Station (Preset Call) - Kenwood R-K1 Instruction Manual

Presetting Stations Manually (Manual Preset)

A desired station can be selected and preset in the preset memory.
1 Press the ENTER key
2 Select the preset number
3 Repeat steps 1 and 2 for

Receiving a preset station (Preset Call)

Recalling a preset station by specifying its
number:
decrease
number
Recalling a preset station by specifying its
number:
during reception of the
desired station
Go to step 2 within 20 sec.
for presetting the station
Advance
Enter the
selection
\
Return
Press within 20 sec.
each station you like
To To
decrease increase
number number
To
To
increase
number
F M - -
F M 2 5
Preset number
÷ The preset number can also be entered directly using the numeric
keys on the remote control unit.
Press numeric keys as follows.
To enter preset number [15]: 0 , 5
To enter preset number [20]: 0 , 0 , )
÷ A preset frequency can be rewritten later.
Press the P.CALL ¢ key to increase the preset number in the
following cycle.
Press the P.CALL 4 key to decrease the preset number in
the following cycle.
÷ Press and hold the key to skip preset stations at about 0.5-sec-
ond intervals.
Press numeric keys as follows.
To enter preset number [15]: 0 , 5
To enter preset number [20]: 0 , 0 , )
Radio Reception
8 7 . 5 0 M H z
8 7 . 5 0 M H z
EN
25