Controls And Indicators; Main Unit - Kenwood KAF-1010 Instruction Manual

Controls and indicators

Main unit

KAF-3010R
3
ON/STANDBY
POWER
ON OFF
1 2 4
ON/STANDBY
POWER
ON OFF
PHONES
!
1 POWER switch (KAF-3010R)
Usually leave this switch to the on position.
When the unit is not to be used for a long period of time, set
the switch to the OFF position for safety.
2 ON/STANDBY key (KAF-3010R)
This key effective when the POWER key is set
to the on (standby) position, and pressing this key
turns power ON and off (standby).
3 Standby indicator (KAF-3010R)
4 POWER switch (KAF-1010)
5 BASS knob
To adjust low frequencies.
6 TREBLE knob
To adjust high frequencies.
7 INPUT indicator
An indicator lights for the source selected
with the INPUT SELECTOR knob.
8 VOLUME CONTROL knob
Adjust the volume.
About the standby indicator (KAF-3010R only)
This unit has a standby indicator that lights to show that a small amount of current is being supplied to the unit in order to preserve the
memory. This is called the Standby mode. When the Standby indicator is lit, the amplifier can be switched ON / STANDBY from the remote
control.
KAF-1010
POWER
ON OFF
5 6
A SPEAKER B BASS TREBLE
@
7 8
CD PHONO TUNER TAPE MD
INPUT SELECTOR
BALANCE
L R
# $
9 SOURCE DIRECT indicator
0
0 SOURCE DIRECT key
To listen to a source with high quality sound.
! PHONES jack
0
Used for headphone listening.
@ SPEAKERS A/B switches
Press to select the A and/or B speaker systems.
# BALANCE knob
Adjust the volume balance between left and right.
0 $ INPUT SELECTOR knob
!
Turn to select the input sources.
% MUTING key/indicator
!
Mute the sound temporarily.
^ LOUDNESS key/indicator
0
Use to emphasize deep bass sounds.
& Remote sensor (KAF-3010R only)
0
KAF-3010R/1010 (En)
9
VOLUME CONTROL
SOURCE DIRECT
MIN MAX
MUTING LOUDNESS
T R A I T
thermally reactive advanced instantaneous transistor
% ^ &
7
0
@
@
@
0
!
0
!
!
9