Operation Of Remote Control Unit; Loading Batteries; Operation Procedure - Kenwood KAF-1010 Instruction Manual

Operation of remote control unit

Loading batteries

1
Remove the cover.
2
Insert batteries.
3
Close the cover.

Operation procedure

Pressing the POWER key on the remote control when the
standby indicator is lit turns ON the power. After the power
comes ON, press the key you want to operate.
30°
Operating range
(approx.)
1. The supplied batteries are intended for use in operation checks. Therefore, their lives may be shorter than ordinary batteries.
2. When the remote-controllable distance gets shorter than before, replace both batteries with new ones.
Notes
Notes
3. Malfunction may occur if direct sunlight or the light of a high-frequency lighting fluorescent lamp enters the remote control light
sensor. In such a case, change the system installation position to prevent the malfunction.
Remote sensor
6 m
30°
Model: RC-A0300
Infrared ray system
(KAF-3010R only)
................................................................................................................
•
Insert two AA-size (R6 / SUM-3) batteries as indicated by the
polarity marking.
................................................................................................................
• When two operation keys on the remote control unit are pressed
successively, press each key securely reserving an interval of
more than 1 second for each press.
KAF-3010R/1010 (En)
9