Controls, Indicators, And Connectors; Meter Range Switch - Kenwood KM-107 Instruction Manual

Controls, indicators and connectors
KENWOOD stereo power AMPLIFIER
METER RANGE
———
ON OFF nxt x01
Note:
2) PHONES jack
When speakers are connected only to the SPEAKERS A ter-
minals, the sound will not be heard if both the SPEAKERS A and
plug. When you wish to listen through headphones
alone, set the SPEAKERS switches (A and B) both
at the OFF ( [1 ) position. © POWER indicator
Indicate the right and left output power up to
3) SPEAKERS A/B switches 200 W (KM-207), up to 150 W (KM-107).
SPEAKERS A — Depressing this switch to the ON
:
( =.) position will connect the output circuits of © METER RANGE switch
the amplifier to the speaker systems connected
When this switch is set to ([1) X0.1 position, the
to the SPEAKERS A terminals on the rear of the
POWER
indicator reading becomes a tenfold conver-
unit. sion.
SPEAKERS B — Depressing this switch to the ON
When this switch is set to (<2) X1
position, the
( _«.) position will connect the output circuits of
POWER indicator reading becomes normal scale.
the amplifier to the speaker systems connected
to the SPEAKERS B terminals on the rear of the
unit.
KM-107/KM-207 (K) 7