Kenwood HM-DV5 Instruction Manual page 67

Table of Contents

Advertisement

DVD/CD player section
Symptom
Playback starts but the video is not output.
The picture is disturbed during forward search
or reverse search.
The picture is not neat or the video or audio
quality is poor.
It takes long time before playback starts.
A warning is displayed on the TV screen and
playback is not possible.
The top and bottom edges of the picture are cut
off.
VCD cannot be played with menu playback.
Subtitles are not displayed.
Audio (or subtitle) language cannot be
changed.
Viewing angle cannot be changed.
The viewing restriction (Rating) cannot be
changed.
The selected audio or subtitle languages is not
played.
¶ The input selection of the TV and/or AV amplifier is incorrect or
these devices are not turned on.
¶ Connection cords are connected improperly.
¶ The picture disturbance during forward search or reverse is normal.
This is not a malfunction.
¶ Connection cords are connected improperly.
¶ A device generating noise is installed near the signal path.
¶ The disc is dirty or damaged. To prevent this, remove dirt and
handle discs carefully so as not to damage them.
¶ There may be condensation of dew on the optical lenses. In this
case, leave the player with power ON for a few hours to dry up
the condensation, then retry operation.
¶ The disc type should be detected and motor rotation stabilized
before starting playback. This is normal and not a malfunction.
¶ The reproduced video may be disturbed or audio may be skipped
when the disc surface is stained with fingerprints or dirt. Clean
the disc surface by wiping it in the radial directions using a soft
cloth.
¶ If the disc is placed obliquely or on another disc, place the disc
correctly.
¶ Playback may be unavailable due to viewing restriction or region
code problem.
¶ The video format of the played disc does not match that of the
connected TV.
¶ Menu playback is not available when P.B.C. is Off.
¶ Menu playback is possible only with P.B.C.-compatible VCDs.
¶ Subtitles are not displayed when the played DVD does not con-
tain the recording of subtitles.
¶ The subtitle language is set to "Off".
¶ The language cannot be switched when the played DVD does not
contain the recording of multiple audio (or subtitle) languages.
¶ The viewing angle cannot be switched when the played DVD
does not contain the recording of multiple angles. The viewing
angle can neither be switched in part where no angle is recorded.
¶ If you have forgotten the password, reset the initial settings you
made till now to the factory setting.
¶ If the played DVD does not contain the default language set by
the user, the priority language specified for the disc will be se-
lected.
In case of difficulty
Remedy
67
8
8
Œ
*
^
Á

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hm-dv6

Table of Contents