Before Applying Power; Safety Precautions - Kenwood HM-337 Instruction Manual

Before applying power

Caution : Read this page carefully to ensure safe operation.
Units are designed for operation as follows.
Australia ....................................... AC 240 V only
Europe .......................................... AC 230 V only
Other countries ......... AC 110 - 120 / 220 - 240 V

Safety precautions

WARNING : TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
RISK OF ELECTRIC SHOCK
THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE, IS IN-
TENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED "DANGEROUS VOLTAGE" WITHIN
THE PRODUCT'S ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK
OF ELECTRIC SHOCK TO PERSONS.
THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE USER
TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS
IN THE LITERATURE ACCOMPANYING THE APPLIANCE.
2
EN
switchable*
CAUTION
DO NOT OPEN
Except for the Europe and Australia
* AC voltage selection
The AC voltage selector switches on the bot-
tom are set to the voltage that prevails in the
area to which the unit is shipped. Before
connecting the power cord to your AC outlet,
make sure that the setting positions of these
switches match your line voltage. If not, they
must be set to your voltage in accordance with
the following direction.
AC voltage
selector
switches
Move switch lever to match your line voltage
with a small screwdriver or other pointed tool.
Note:
Our warranty does not cover damage
caused by excessive line voltage due to im-
proper setting of the AC voltage selector switch.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK). NO USER-SER-
VICEABLE PARTS INSIDE. REFER SERVICING TO QUALI-
FIED SERVICE PERSONNEL.