Random; Repeat; Intro Scan - Kenwood HM-337 Instruction Manual

Using the CD
If you press repeat button on the unit (REPEAT
button on the remote control) during
programmed playback, the current track or all
programmed tracks will be played repeatedly.
The icon "REPEAT ONE" or "REPEAT ALL" and
the icon "PROGRAM" will appear on the display.
6 Press 7 STOP button once to stop program
playback or twice to clear the program.
The icon "PROGRAM" will disappear from the
display.
Notes:
• "P" represents PROGRAM.
• The program is automatically cleared as soon as the
CD compartment is opened.
• The function of program setting is disabling in PLAY/
PAUSE mode.

Random

You can play all the tracks in random order.
1 During playing, pause or stop mode, press
RANDOM button on the remote control to
enable random play mode.
The icon "RANDOM" will appear on the display.
2 To exit random mode, press RANDOM button
again. The icon "RANDOM" will disappear from
the display.
Note:
If the program function enabled, and the repeat function
is set on, will disable the random play mode.
10
EN

Repeat

You can play the current track or the whole disc
repeatedly.
To repeat all the tracks
Press repeat button (REPEAT button on the
remote control) once in play or pause mode, the
icon "REPEAT ALL" will appear on the display.
• All tracks will be repeated continuously.
• To cancel repeat play, repress repeat button
(REPEAT button on the remote control) twice.
To repeat a single track
Press REPEAT button twice in play or pause mode,
the icon "REPEAT ONE" will appear on the display.
• To cancel repeat play, repress repeat button
(REPEAT button on the remote control) once.

Intro scan

This function let you listen to the first 10 seconds
of each track throughout the disc.
Press INTRO button on the remote control to start
scanning, and the icon "INTRO" will appear on the
display.
To stop the intro scan
Press INTRO button on the remote control again.
The unit enters normal play mode and starts
playing from where you stop the scanning.