Using The Cassette; Playing A Cassette Tape; Recording On A Cassette Tape - Kenwood HM-337 Instruction Manual

Using the cassette

Playing a cassette tape

1 Press TAPE button to TAPE.
2 Press push open button to open the cassette
compartment door.
3 Insert cassette tape into the compartment with
the open edge facing down and the full reel on
the left.
4 Close the door securely.
5 Press 4 or ¢ button to move tape to the
desired starting point.
6 Press 6 PLAY/PAUSE button to begin
playing the tape.
7 Press volume buttons (VOLUME + or – button
on the remote control) and EQ/X-bass button
(EQ/X-BASS on the remote control) to desired
listening level.

Recording on a cassette tape

You can record from the radio or the CD player.
For best recording, use normal bias tape (Type 1
only).
Recording from the radio
1 Insert a cassette tape into the tape deck and
close door.
2 Press TUNER/band button (TUNER/BAND
button on the remote control) to TUNER and
select a radio station.
3 Press rec button (REC/DEMO button on the
remote control) to set the unit into recording
standby mode.
"REC " and the icon "REC. " appears on the
display.
4 Press 6 PLAY/PAUSE button to begin
recording.
5 Press 7 STOP button to end recording.
6 To turn off radio, press TAPE button to TAPE.
Radio recording tip
• To temporarily pause the recording, press rec
button (REC/DEMO button on the remote
control). Press 6 PLAY/PAUSE button to
resume recording.
Recording from a CD
1 Insert a blank cassette tape into the tape deck.
2 Press CD button to CD.
3 Insert a CD and select the first track you want
to record.
4 Press rec button (REC/DEMO button on the
remote control) to set the unit into recording
standby mode.
"REC " and the icon "REC. " appears on the
display.
5 Press 6 PLAY/PAUSE button to begin
recording.
The icon "REC. " and the icon"SYNC" will
appear on the display.
The track you have selected in the step 3 will
be played from the beginning.
6 Press rec button (REC/DEMO button on the
remote control) to interrupt or edit recording.
Press 6 PLAY/PAUSE button to resume
recording.
7 Press 7 STOP button to end recording.
Notes:
• During recording, it is not possible to listen to
another source.
• You can program tracks and record onto a cassette
tape. If you wish to record only one track, program
that track first, and then record it. (See page 9)
13
EN