Download  Print this page

Using The Radio; Tuning In Radio Stations; Storing Preset; Tuning To A Preset Radio Station - Kenwood HM-337 Instruction Manual

Compact hi-fi component system
Hide thumbs

Advertisement

Using the radio

Tuning in radio stations

1 Press TUNER/band button (TUNER/BAND
button on the remote control) to select TUNER
mode.
The current radio frequency will be displayed.
2 Press TUNER/band button (TUNER/BAND
button on the remote control) to select the
desired waveband: FM or AM.
3 Press and hold 4 or ¢ button (4 or ¢
SEARCH/TUNING button on the remote
control).
Repeat this procedure until the desired station
is reached.
To tune to a weak station briefly press 4 or
¢ button (4 or ¢ SEARCH/TUNING
button on the remote control) repeatedly until
the display shows the desired frequency or
when the best reception has been obtained.

Storing preset

You can store up to 20 for FM and 20 for AM radio
stations in the memory. When a preset radio
stations selected, the preset number appears on
the display.
1 Press TUNER/band button (TUNER/BAND
button on the remote control) to select TUNER
mode.
2 Press TUNER/band button (TUNER/BAND
button on the remote control) to select the
desired waveband: FM or AM.
3 Press 4 or ¢ button (4 or ¢ SEARCH/
TUNING button on the remote control) to tune
to the desired frequency.
4 Press program button (PROGRAM button on
the remote control) so that "– –" will start
flashing.
5 If you wish to store the radio station to another
preset number, p.call + button (P. CALL +
button on the remote control) or p.call – button
(P . CALL – button on the remote control) to
select the desired preset number.
6 Press program button (PROGRAM button on
the remote control) again to store the radio
station.
Repeat steps 3 to 6 to store other preset radio
stations.
Note:
During program, if no button is press within 20 seconds,
the system will exit program mode automatically.

Tuning to a preset radio station

Press p.call + button (P . CALL + button on the
remote control) or p.call – button (P . CALL – button
on the remote control) to select the desired preset
number.
• The preset number and radio frequency will
appear on the display.
STEREO/MONO
Press the STEREO/MONO button on the remote
control to select stereo or mono mode.
• When stereo mode is selected, the icon
"STEREO" will appear on the display (if current
station is FM stereo).
Note:
You are able to select stereo or mono mode in FM band
only.

Using RDS (Radio Data System)

(For the Europe only)

RDS is a system that transmits useful information
(in the form of digital data) for FM broadcasts along
with the broadcast signal. Tuners and receivers
designed for RDS reception can extract the
information from the broadcast signal for use with
various functions, such as automatic display of the
station name.
RDS functions:
PTY (Program TYpe Identification) Search
Automatically tunes to a station that is currently
broadcasting the specified program type (genre).
PS (Program Service Name) Display:
Automatically displays the st ation name
transmitted by the RDS station.
continued to next page
11
EN

Advertisement

loading

  Related Manuals for Kenwood HM-337