Disc; Playing A Disc; Dvd/ Vcd Basic Operation - Kenwood DDX9904S Instruction Manual

Disc

(DDX9904S/ DDX9704S)

Playing a disc

Ñ
Insert a disc
1
Press the [G] button.
2
Touch [DISC EJECT].
h The panel opens. h
3
Insert the disc into the slot.
h The panel closes automatically.
h
The unit loads the disc and playback
starts.
Ñ
Eject a disc
1
Press the [G] button.
2
Touch [DISC EJECT].
When removing a disc, pull it horizontally.
3
Press the [G] button.

DVD/ VCD Basic Operation

Most functions can be controlled from the
source control screen and playback screen.
NOTE
• Set the remote control mode switch to DVD
mode before starting operation for DVD and VCD,
see Switch the operation mode (P.80).
• The screen shot below is for DVD. It may be
different from the one for VCD.
1
When the operation buttons are not
displayed on the screen, touch the
area.
Control screen
1
2
3
Video screen
6
7
Information display
1
Displays the following information.
• Title #, Chapter #: DVD title and chapter
number display
• Track #/Scene #: VCD track or scene number
display. Scene # is displayed only when
Playback control (PBC) is on.
• Linear PCM, etc.: Audio format
• [Hide]: Hides the control screen.
Disc
7
4
5
8
6
15
English