Introduction; Before Applying Power; Safety Precautions - Kenwood DVF-N7080 Instruction Manual

Introduction

2

Before applying power

Units are designed for operation as follows.
Europe and U.K. ............................................................ AC 230 V only
Australia ........................................................................ AC 240 V only

Safety precautions

WARNING : TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION
R I S K O F E L E C T R I C S H O C K
D O N O T O P E N
The marking of products using lasers
(For countries other than U.S.A. and U.S.-Military)
LASER PRODUCT
The marking this product has been classified as
Class 1. It means that there is no danger of haz-
ardous radiation outside the product.
Location: Back panel
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVIC-
ING TO QUALIFIED SERVICE PERSONNEL.
THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE,
IS INTENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED "DANGEROUS
VOLTAGE" WITHIN THE PRODUCT'S ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE
TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS.
THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE
USER TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING) IN-
STRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE.
CLASS 1
Caution : Read this page carefully to ensure safe operation.
Caution : Read this page carefully to ensure safe operation.
CAUTION
VISIBLE LASER RADIATION
WHEN OPEN. DO NOT
STARE INTO BEAM.
Inside this laser product, a laser diode classified as
Class 2 laser radiation is contained as alerted by the
internal caution label shown above. Do not stare
into beam.
Location: DVD laser pick-up unit cover inside this
product
DVF-N7080 (EN/E,X)