Playback Of Data Disc; Basic Play - Kenwood DVF-N7080 Instruction Manual

Playback of Data disc

28

Basic play

Preparation
Turn on the POWER.
After pressing the POWER (ON/STANDBY) key, it
takes time for a while that operation becomes
posible.
1
Load a disc.
MAIN UNIT
1
Open the tray.
2
Place a disc.
3
Close the tray.
When the Input selector is not set to DVD,
2
press the DVD/MEMORY CARD key.
MAIN UNIT
When saving files onto media
Ensure that the session is closed or finalized when data has been written on media. There are cases where media on which the
session has not be closed or finalized will not be played back correctly with this equipment.
÷ There are cases where the folder names and file names will not be displayed correctly depending on the software used
to save them.
÷ Do not write folder or file types which cannot be played back with this equipment onto the media.
÷ It is recommended that ten or less sessions are stored when recording files onto a media.
÷ In case of a multisession disc, some time may be required until playback begins.
÷ There are cases where playback is not possible when MP3/WMA/JPEG files (CD-ROM) and music CD infomation (CD-DA)
are saved on the same media.
REMOTE
DVD/MEMORY CARD
Various playback functions (Data disc)
POWER
1 2 3
4 5 6
7 8 9 0
DVD/
MEMORY CARD
RETURN
6(Play/Pause)
Cursor/ENTER
Label side
When the Input selector is set to DVD, "READING" is dis-
played, and the HOME screen is displayed when the data
disc information has been recognized.
Instead of pressing the DVD/MEMORY CARD key,
switching also can be done in the following way.
1 Press the RETURN key on the remote to display
the SELECT INPUT menu.
RETURN
2 Press the Cursor up/down (5/∞) keys on the re-
mote to select DVD, then press the ENTER key.
DVF-N7080 (EN/E,X)
6(Play/Pause)
ON/STANDBY
DVD/MEMORY CARD
0 (Open/Close)
Please choose selector.
DVD
NETWORK SERVER
MEMORY CARD
READING