Table of Contents
Advertisement
Remote control with the joystick remote is impossible.
¶ The batteries are exhausted.
¶ The controller position is too apart from the remote sensor,
the control angle is deviated or there is an obstacle between
the remote and remote sensor.
¶ The mode switch is not set to the proper position.
An inhibition icon is displayed and no operation is accepted.
¶ The operations of certain DVDs and VCDs are restricted by
the intention of the software producers. Such discs should
be operated in accordance with the software. Operations may
also be restricted depending on the player status.
DVD playback cannot be stopped by pressing the STOP
button.
¶ With certain DVDs, the inhibition icon is displayed and
playback cannot be stopped even when the 7 button is
pressed. In this case, press the DISC SKIP button to select
another disc then press the 7 button to stop playback.
If there is only one disc in the tray, open the tray, place another
disc, close the tray, press the DISC SKIP button to select the
second disc, then press the 7 button to stop playback.
The player display shows nothing.
¶ The player display is set to "FL OFF".
Error code "E0102" is shown in the display and no operation
is accepted.
¶ Up to 5 discs can be placed in the tray of the player.
If you set a 6th disc by rotating the tray manually during
playback while 5 discs have already been placed in the player,
the player detects an error and the display shows error code
"E0102" at the moment you attempt close the tray.
In this case, turn the player off, remove one of the discs, then
turn the player on again.
DVF-R9030
Symptoms and Treatment
9 to @
8
89
Advertisement
Table of Contents
