Turning Power On - Kenwood DV-4070 User Manual

Turning power on

1.
Turn the connected components on and set the input selector
of the connected amplification component to "DVD"
POWER
2.
Press
- ON – OFF
indicating that the power of the player is in the standby mode.
When the power of the player is in the standby mode, press
POWER
on the joystick remote.
¶ The player can also be turned on by pressing the 3 button
or OPEN/CLOSE 0 button on the player main unit.
¶ Before turning the player on or off, minimize the volume
control of the connected amplification component.
¶ When the player is turned on, it reads the discs in the tray
and lights the disc number indicators on the display to inform
the user of presence and absence of discs. If there is any disc
in the tray at this moment, the disc will be played back
automatically. (If the player is turned on by pressing the
OPEN/CLOSE 0 button, only the tray is opened or closed.)
[To put the player power in the standby mode]
¶ When the power is on, press the POWER
the joystick remote. The "STANDBY" indicator lights up to
indicate that the player is in the standby mode of power.
[To turn the player off]
¶ When the power is on or standby, press the POWER button
on the player main unit to turn it off.
DVF-R9030
on the player. The "STANDBY" indicator lights,
button on
15