Table of Contents
Advertisement
Audio (or subtitle) language cannot be changed.
¶ The language cannot be switched when the played DVD does
not contain the recording of multiple audio (or subtitle)
languages.
Viewing angle cannot be changed.
¶ The viewing angle cannot be switched when the played DVD
does not contain the recording of multiple angles. The
viewing angle can neither be switched in part where no angle
is recorded.
The viewing restriction (Rating) cannot be changed.
¶ If you have lost the password, initialize the default setting
by the user to the factory setting as described below.
While holding the 7 button on the main unit, press the
POWER button. When the display shows "INIT OK!", switch
the power on again.
The selected audio or subtitle languages is not played.
¶ If the played DVD does not contain the default language set
by the user, the priority language specified for the disc will
be selected.
The TV screen does not show any message when a button is
pressed.
¶ If "On Screen Message" is set to "Off", switch it "On".
The messages in the menus are not displayed in the selected
language.
¶ If the played DVD does not contain the recording of the
default language set by the user, the priority language
specified for the disc will be selected.
88
Symptoms and Treatment
Connection and Setup Guide 9
Connection and Setup Guide fifl
Connection and Setup Guide £
Connection and Setup Guide ›
·UŒ
‰
DVF-R9030
Advertisement
Table of Contents
