Table of Contents
Advertisement
Symptoms and Treatment
Playback starts but the video is not output.
¶ The Pure Audio function is set to on.
¶ The input selection of the TV and/or AV amplifier is incorrect
or these devices are not turned on.
¶ Connection cords are connected improperly.
Playback starts but the audio is not output.
¶ The "Speaker Setting" is incorrect.
¶ The input selection of the TV and/or AV amplifier is incorrect
or these devices are not turned on.
¶ The volume of the TV and/or AV amplifier is not adjusted
properly.
¶ Audio output cords are connected improperly.
The picture is disturbed during forward search or reverse
search.
¶ The picture disturbance during forward search or reverse is
normal. This is not a malfunction.
The picture is not neat or the video or audio quality is poor.
¶ Connection cords are connected improperly.
¶ A device generating noise is installed near the signal path.
¶ The disc is dirty or damaged. To prevent this, remove dirt
and handle discs carefully so as not to damage them.
¶ There may be condensation of dew on the optical lenses. In
this case, leave the player with power ON for a few hours to
dry up the condensation, then retry operation.
86
Connection and Setup Guide 0@
Connection and Setup Guide •
Connection and Setup Guide 0@
Connection and Setup Guide 0@
Connection and Setup Guide q
Connection and Setup Guide w
°
DVF-R9030
Advertisement
Table of Contents
