Switching The Level Meter - Kenwood R-K701 Instruction Manual

Switching the level meter

1
Select "LEVEL METER".
Press the MODE key and select "LEVEL
METER" by pressing the 4 / ¢ key, and
press the ENTER key.
MODE
2
Switch between ON and OFF.
1
Select ON or OFF by pressing the 4 / ¢
key.
2
Press the ENTER key.
AUTO POWER SAVE (A.P.S.) function
When the unit is ON and the unit is left for about 30 minutes with CD not operating, the unit is switched off (standby)
automatically by this function. This is convenient when you forgot to switch off the unit. This function can be
activated or deactivated by the following operation.
1
Select "A.P.S. SET".
MODE
(Press the ENTER key while the "A.P.S. SET"
is blinking.)
ENTER
ENTER
ENTER
÷ The character information display and level meter start
to blink.
÷ Each press of the 4 / ¢ key switches "ON" and
"OFF" of the level meter. The "ON" or "OFF" display
blinks.
2
Select "A.P.S. ON" or "A.P.S. OFF".
3
Press the ENTER key.
ENTER
÷ When the TUNER or an external input is selected,
A.P.S. function operates only when the volume is
set to zero or when MUTE is on.
2 3 4 5
TUNED ST. AUTO
L
30 10 5 3 1 0 (-dB)
R
2 3 4 5
TUNED ST. AUTO
L
30 10 5 3 1 0 (-dB)
R
2 3 4 5
TUNED ST. AUTO
43
EN