Table of Contents
Advertisement
Audio effect control features
<When the KDS-P901 is not connected>
System Q
You can recall the best audio setting preset for different types
of the music.
Switching the Preset Sound Setting:
Each time you press the Q button, the preset sound setting
switches as follows:
User memory*
Flat (Default setting)
Scan of Flat – Easy
Rock
Easy
Top 40
Jazz
Pops
NOTE
The System Q function changes the values of the following
sound quality parameters:
Bass centre frequency, bass level, bass quality factor, bass
extend, middle centre frequency, middle level, middle quality
factor, treble centre frequency, treble level.
Their setting values are different depending on the setting of the
speaker setting mode. (page 18)
Speaker Setting
This function allows you to adjust the setting that is recalled
with the System Q, according to types of speakers.
1
2
3
*User memory:
The unit returns to the state
adjusted the last time with
4
the audio control setting feature.
NOTE
Speaker setting function allows for tuning of bass, middle and
treble
Non-Fading Output
You can turn the non-fading output on and off.
Turning non-fading output On/Off :
— 18 —
Press the SRC button repeatedly to select the standby mode.
"ALL OFF" is displayed when the standby mode is selected.
Press the Q button to enter the speaker setting mode.
Press either the 4 or ¢ button to select the type of
speaker. The setting switches as follows.
Off ("Speaker Setting OFF") /
For the OEM speaker ("Speaker Setting O.E.M.") /
For 6x9/6 in. speaker ("Speaker Setting 6
For 5/4 in. speaker ("Speaker Setting 5/4 inch") /
Press the Q button to end the speaker setting mode.
Hold down the NF button for one second or more to set the
function ON or OFF.
"NF ON" is displayed when the non-fading output is set ON.
9/6 inch") /
*
Advertisement
Table of Contents
