Table of Contents
Advertisement
RDS features
Traffic Information Function
You can listen to traffic information. If you are listening to
tapes or discs, they will continue playing until a traffic bulletin
is broadcast.
Turning TI function On/Off:
Press the TI button to turn the function on and off.
When the function is on, the TI indicator is turned on.
When none is being received, the TI indicator will blink on and
off. When a traffic information station is being received, the TI
indicator will turn on.
When a traffic bulletin begins to be broadcast, "Traffic Info" will
be displayed, and reception will begin at the preset volume.
If you are listening to a tape or disc when a traffic bulletin
begins, they will automatically be turned off. When the bulletin
ends or poor reception is experienced, the tape or disc will
begin playing again.
NOTE
Pressing the TI button whilst in the MW/LW band automatically
switches reception to the FM band. However, the MW/LW band
is not returned to when the TI button is pressed again.
Switching to a Different Traffic Information Station:
Use the 4 / ¢ buttons to make an auto seek of the TI
stations in a certain band.
NOTE
• When you are listening to a tape or disc, you cannot change to
another TI station.
• When the auto TP seek function is turned on and reception
starts to weaken, the tuner automatically seeks traffic
information stations with better reception.
• If you are tuned to a station that is not a traffic information
station itself but which provides <Enhanced Other Network>
services, you can still have traffic information received.
• Holding down the TI button for one second or more when the
TI function is on in the disc mode results in a change to the
programme service name or frequency display of the traffic
information station for five seconds.
Presetting Volume for Traffic Information/News
Preset the volume level to be used for traffic information and
news broadcasts.
1
Tune into the station for which you want to set the volume.
2
Adjust the volume to the desired level.
3
Hold down the TI VOL ADJ button for two seconds or more.
The volume level blinks once in the display to indicate that the
data has been stored.
Future traffic information/news broadcasts are heard at the
preset level.
NOTE
• The volume cannot be lowered by this function during tuner
reception. The volume is only set when it is louder than the
listening volume of the tuner.
• You can arrange only to listen to traffic information or news
bulletins with at preset volume with the volume set at
minimum.
Programme Type (PTY) Function
Conduct auto seek tuning only on those stations with selected
kinds of programmes.
Press the 38(PTY) button.
1
"PTY Select" is displayed, and the Programme Type Selection
(PTY) Mode entered.
If you make no key input in 30 seconds, the mode will
automatically turn off.
NOTE
You cannot use this function whilst the traffic bulletin is received.
2
Select the type of programme to be received
• Press either the FM or AM button repeatedly until the type of
programme you want to listen to.
The selection includes:
— 34 —
Advertisement
Table of Contents
