System Q; Mobile Preset; Clock Display - Kenwood KDC-1018 Instruction Manual

Flat ("SQ-1")
Rock ("SQ-2")
Top 40 ("SQ-3")

System Q

You can recall the best audio setting preset for different types
of the music.
Switching the Preset Sound Setting:
Each time you press the Q button, the preset sound setting
switches as follows:
Scan of Flat – Easy ("SCAN/SCAn")
(Default setting)
Flat ("FLAT/SQ-1")
Rock ("ROCK/SQ-2")
Top 40 ("TOP 40/SQ-3")
As you proceed, each indicator would go on.
NOTE
The System Q function changes the values of the following
sound quality parameters:
Scan of Flat, Rock – Easy
Bass center frequency, bass level, bass quality factor, bass
(Default setting)
extend, middle center frequency, middle level, middle quality
factor, treble center frequency, and treble level.
Flat
Note that some of these parameters cannot be controlled by the
audio control setting feature.
User memory*
Their setting values are different depending on the setting of the
Rock
mobile preset plan mode.

Mobile Preset

This function allows you to adjust the setting that is recalled
with the System Q, according to types of speakers.
1
Press the SRC button repeatedly to select the standby mode.
"ALL OFF/OFF" is displayed when the standby mode is
selected.
2
Press the Q button to enter the mobile preset plan mode.
Easy ("SQ-6")
Jazz ("SQ-5")
Pops ("SQ-4")
Easy ("EASY/SQ-6")
Jazz ("JAZZ/SQ-5")
Pops ("POPS/SQ-4")
Easy
Jazz
Pops
*User memory:
The unit returns to the state
Top 40
adjusted the last time with
the audio control setting feature.
Press either the 4 or ¢ button to select the type of
3
speaker. The setting switches as follows.
Off ("SP OFF/ SP-F") / For the OEM speaker ("SP OEM/ SP-O")
/ For 6/6x9 in. speaker ("SP 6/6x9/ SP-6") / For 5/4 in. speaker
("SP 5/4/ SP-5")
4
Press the Q button to end the mobile preset plan mode.
NOTE
When you change the setting of type of speaker, the bass,
Flat ("SQ-1")
middle, and treble tone settings are returned to original levels.
Rock ("SQ-2")
Top 40 ("SQ-3")

Clock display

Changing the Clock Display:
Press the CLK button to switch the clock display on and off.
NOTE
The clock indicator lights while the clock is displayed.
— 9 —
Scan of Flat – Easy ("SCAn")
Easy ("SQ-6")
Jazz ("SQ-5")
Pops ("SQ-4")
Function of the KDC-2018/KDC-1018