Audio Control Setting; Theft Deterrent Faceplate - Kenwood KDC-1018 Instruction Manual

General features

Audio Control Setting

Adjust various parameters of sound quality.
1
Press the AUD button for at least one second to enter the
control mode.
2
Selecting mode
Press either the FM or AM button.
Each time the button is pressed, the adjustment mode will
change as follows:
Pressing the FM button advances the display, and pressing the
AM button reverses it.
Bass Fader
Middle
Balance
Treble
NOTE
Source tone memory
Each source (CD, MD, FM, AM and disc changer) has its own
memory in which to store the bass, middle, and treble tone
settings.
The settings made for a particular source are recalled
automatically whenever you use that source (for example, FM
mode uses the tone settings made for FM, AM for AM, etc.).
3
Adjust each mode
Press the 4/¢ button.
Look at the table to adjust the mode being displayed.
Adjustment
mode
4 button
(Display)
Bass ("BAS") Bass decreased.
Middle("MID") Middle decreased.
Treble("TRE")
Treble decreased.
Balance
Left channel emphasized.
("BAL/BL")
Fader
Rear channel increased.
("FAD/FD")
4
Press the AUD to end the control mode.
NOTE
Determining the parameters in the audio control setting would
clear all the adjustments made in the System Q and they are
replaced with the values in the audio control setting.
Function of the KDC-4018/KDC-4018G/KDC-2018

Theft Deterrent Faceplate

The faceplate of the unit can be detached and taken with you,
helping to deter theft.
Release button
Removing the Faceplate:
Press the release button.
The faceplate is unlocked, allowing you to detach it.
NOTE
• The faceplate is a precision piece of equipment and can be
damaged by shocks or jolts. For that reason, keep the faceplate
— 10 —
Operation of Audio control button
¢ button
Bass increased.
Middle increased.
Treble increased.
Right channel emphasized.
Front channel increased.
Projections
Grooves