Av Interface; Displaying The Av I/F 1 Screen - Kenwood DDX8027 Instruction Manual

Control during DVD Video, DVD Audio or Video CD Playback

AV Interface

You can set audio and visual (AV) interface parameters.

Displaying the AV I/F 1 screen

AV Interface
AV I/F 1 screen
MENU Navigation
3
4
2
AV-IN1 Name
5
1
AV-IN2 Interruption
6
AV-IN2 Name
7
64
|
English
4
RGB
VIDEO1 5
On 6
VIDEO2
7
AV I/F 1 8
1 Returns to the Control screen of the previous
source.
2 Calls the Sound Effects Menu. (page 80)
3 Calls the Setup Menu.
4 Selects a navigation system connection. (
"RGB": Allows the Kenwood's Navigation System
to connect via its interface cable.
"AV-IN1": Allows a third-party navigation system to
connect via the AV INPUT1 port.
"Off": Must be used if no navigation system
is connected. (The navigation display
is cancelled when the AV source is
switched.)
5 Sets a name to be displayed when you select a
system that is connected via the AV INPUT1 port.
( VIDEO1)
• If you have set the navigation system connection to "AV IN1",
the display is fixed to "NAV".
6 Sets an image display of the system that is
connected via the AV INPUT2 port. (
"Off": When the image source is switched, an
image entered via the AV INPUT2 port is
displayed.
"On": When an image signal is entered via the AV
INPUT2 port, this image is displayed.
7 Sets a name to be displayed when you select an
image of the system that is connected via the AV
INPUT2 port. ( VIDEO2)
8 Displays the AV I/F 2 screen.
• If is not shown, touch
AV I/F Set Up
to display it.
Next
RGB)
Off)
or
Prev.