Installing The Escutcheon - Kenwood DDX7039 Installation Manual

Installing the Escutcheon

For General Motors
1. Refer to the section <Removing the Hard Rubber
Frame> and then remove the hard rubber frame.
2. Cut out accessory 5 to meet the shape of the
opening of the center console.
3. Attach accessory 5 to the unit.
For Toyota/Scion
1. Refer to the section <Removing the
Hard Rubber Frame> and then remove
the hard rubber frame.
2. Cut out accessory 5 as illustrated.
3. Fold double-sided adhesive (accessory
6) along the slit and attach it to
accessory 5 cut-out against the
center rib as illustrated. Use 2 pieces
of accessory 6 for 1 accessory 5 cut-
out.
4. Attach accessory 5 cut-out to the unit.
|
8
DDX7039
Accessory 6
Cut out to meet the shape of
the opening in the vehicle.
Accessory 5
Cutting line
Accessory 5