Hoover U5725960 Manual page 4

STEP 1 Attach handle
1-2
A
Remove cardboard (A) and screws
from handle section. Discard card-
board.
1-5
Slide handle section onto back of
handle.
Push screws into holes on back of
handle.
Tighten screws securely with a
Phillips screwdriver.
Remove powered hand tool from
plastic bag and return it to the tool
storage area.
4
1-3
Open tool cover on cleaner body
(B).
Remove powered hand tool.
1-6
Remove switch lock (C) above ON/
OFF switch (D) by pulling it straight
out. Dispose of switch lock.
If switch lock has come off during
assembly, make sure switch is in
OFF position (down) before plug-
ging into electrical outlet.
1-4
B
Make sure that the switch is in the
OFF position.
C
D