Mouse Connection; Mouse Overview; Mouse Maintenance - VTech Monster Academy User Manual

NOTE: If for some reason the program/activity stops working, it may be the result
of the adaptor connection. Please follow these steps:
1. Please turn the unit off and unplug the adaptor for 15 seconds.
2. Reinsert the adaptor plug into the adaptor jack.
3. Turn the unit ON.
If the problem persists, it may be the result of the adaptor's wiring or the unit. Please
contact our Consumer Services Department at 1-800-521-2010 in the U.S. or 1-800-
267-7377 in Canada.

MOUSE CONNECTION

DETACHING THE MOUSE FROM THE MAIN UNIT.
Please note that the mouse should not be detached completely from the unit. It
has a retractable cord and is intended to be used attached to the unit.
1. Locate the mouse on the back of the unit.
2. Lift the back end of the mouse away from the main unit.
3. Gently pull the mouse cord out until fully extended.
RETURNING THE MOUSE TO THE MAIN UNIT
1. Place mouse cord carefully back inside the main unit.
2. Click the mouse securely back into the storage area.

MOUSE OVERVIEW

Once the mouse is free from the unit you may move the mouse cursor around the
screen freely. The mouse has a roller ball in it and therefore should be used on a
flat surface. A mouse pad is ideal, but you may also try a piece of paper, a notebook
or a magazine. A clean flat surface is important to be able to use your mouse effectively.
Your mouse is very easy to use. To use the mouse, push it in the direction that you
would like the pointer
of the screen, push the mouse to the right. To move the pointer to the left side of
the screen, push the mouse to the left. To move the pointer to the top of the screen,
push the mouse away from you. To move the pointer to the bottom of the screen,
pull the mouse towards you.

MOUSE MAINTENANCE

To clean the mouse, you need to open the cover on the
bottom of the mouse by using a screwdriver. Twisting in
the direction of the arrows will release the cover. Once
the cover is removed, the mouse ball should be taken out
and the contents inside the mouse should be cleaned with
a dry cloth. The mouse ball should also be cleaned with
a dry cloth. Once you have finished cleaning the mouse,
place the mouse ball back into the mouse and screw the
cover back onto the mouse.
on the screen to move. To move the pointer to the right side
3